15W Electronic Load Resistor USB Discharge Battery Capacity Test Meter with Fan

Description

15W Electronic Load Resistor USB Discharge Battery Capacity Test Meter with Fan
15W 3.7-13V Electronic Load Resistor
Specification:
Brand new
Voltage: DC 3.7-13V
Adjustable current: 0.15-3.00A
Power: 15W (continuous working)
Fan working temperature: 40°c
Fan: Ball bearing fan
Size: approx. 68*30*23mm
Color: as picture shows
Package included:
1pc x Electronic Load Resistor Tester
Note:
Please allow 1-5mm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same
15W 150V Electronic Load
Tester
Specifications:
PowerVoltage:DC6~12V Interface:DC5.0
Voltage measure range:0~150V Accuracy:1.5V
Current adjustable range:0~10A Accuracy:0.05A
Capacity range:0~999.999Ah Accuracy:0.001Ah
Cumulative range:0~99999.9Wh Accuracy:0.01Wh
Measure range:0~2999.9W Accuracy:0.01W
Impedance range:0~999.9Ω Accuracy:0.01Ω
Temperature range:0~99℃ Accuracy:1℃
Max timing :999:59:59 Accuracy:1s
Fan cooling power:＜150W
Fan control threshold：Temp＞40℃
Standby reminder threshold：＜2W/0.5h;
Timing function：＞0.5W start timing
Input interface: 20A high current occlusion screw column, type A USB,Mini USB, Micro USB, Type-C USB
Refresh time:＞500ms/time
Measurement rate: 0.5time/s
Over limit alarm: interface warning and buzzer alarm
Voltage overrun auto- stops discharge range:0~150V
Current overrun auto- stops discharge range:0~10A
Power overrun auto- stops discharge range:0~150W
Display screen: LCM display
Size：149×96×80mm/195×105×135mm(package）
Weight：570g（package）/370g(net weight）
Consumption：＜1.5A
Operating temp：-10~60℃
Operating humidity：10~80（No condensation）
Mode button function description
:
1. Click to switch each display interface
2. The function of the button operation in the 2-4 interface is as follows:
①long press all records to clear;
②Double-click capacity (Ah) to reset to zero;
③three-stroke power (Wh) reset to zero;
④four-stroke power (00:00:00) reset to zero;
⑤consecutive seven hits at no load, making the current zero accurate in the current temperature environment.Calibration is zeroed for accurate measurement at low currents;Factory reset all parameters.
3. The operation functions of the buttons under the interfaces 6, 7, 9, 11, and 13 are as follows:
①Double-click the parameter value to increase, double-click and long press the parameter to continue to increase;
②The value of the three-stroke parameter is reduced, and the length of the three-stroke is continued to decrease.
How to use
:
1. Input voltage × current ≤ 150W;
2. Turn on the load power supply, and the coarse and fine adjustment knobs will be reset to zero (counterclockwise to the end)
3. Long press the mode button to clear all data;
4. Connect to the power supply under test, and use the fine adjustment knob to slowly adjust the discharge current.When the fine adjustment cannot meet the current value, the fine adjustment is reset to zero, and the coarse adjustment knob is slowly adjusted.And with fine adjustment until the required current value is reached.
5. It is recommended to set the cutoff voltage (lower voltage input) when the battery is discharged.In order to avoid damage caused by excessive discharge.
Interface introduction:
Note: 150V 10A 150W is the test upper limit, output voltage × input current ≤ 150W
Product List:
1*Electronic load host
1*Power Adapter
1*Instruction manual
Shipping
Feedback
Contact us
Return Policy
Shipping
Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.
International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.
Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.
Feedback
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "
Delivery on time
" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the "
Ask the seller a question
" link on eBay.
Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.
Contact us
For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the "
Ask the seller a question
" link on eBay.
We expect positive feedback and 5 scores DSR  from you.
Return Policy
We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
Please include your eBay ID and item number with any email requests.