AGILENT MICRO METER 100pW-10uW 50MHz-26.5GHz / # 8 W2D 7501

Description

Welcome to the Patkor store auction
In this auction we offer:
Price for 1 piece!!!
I offer a set of a universal digital micrometre, type E4418B, produced by the American company Agilent, together with a measuring transducer type 8485D.
NOTE: This is practically the most sensitive transducer in the standard line.
The transducer is designed to measure power in the range of 100pW-10mW (-70dBm to -20dBm) in the frequency range of 50MHz-26.5GHz.
Technical data:
- measurement accuracy of the device (repeatability) 0.02dB
- converter inaccuracy in the range of 50MHz to 6GHz better than 1.35%, 6GHz to 18GHz better than 1.83%, 18GHz to 26.5GHz 2.45%
NOTE: The transducer enables measurements up to 33GHz with increased error (option A is not available, but it is possible).
The transducer is equipped with an APC 3.5 type connector (SMA precise)
The device enables the averaging of results from 1 to 1024 measurements, which greatly improves the resistance to measurement disturbances, unlike older devices, the device has 3 measurement speeds
- 20 measurements on p
- 40 measurements on p
- 200 measurements on p
This speeds up the measurement procedures.
The microwatometer has a built-in power calibrator with an output power of 1mW at 50MHz frequency with an accuracy of 0.5% - this enables auto-calibration
Of course, the device has a built-in GPiB interface.
NOTE: The device works with both the included sensor, but it can work with virtually all types of HP converters (E4410, E9300, the entire 8480 series, as well as any clones of the 8480 series).
This greatly simplifies the completion of the measuring equipment.
Since the full specification covers several dozen pages, we will send those interested by e-mail.
The device has a built-in power calibrator with an output power of 1mW at a frequency of 50MHz.
The device is in very good condition, has been tested and is ok.
The only defect is a torn piece of plastic cover on the right side of the faceplate at the very edge (shown in the photo) - this is due to the incorrect removal of the calibration sticker.
You are bidding on the meter with the user manual, sensor, connection cable and a 30-decibel N attenuator so that you can calibrate with an internal calibrator.
NOTE: The device is perfect for measuring the strength of the electromagnetic field as well as testing the equipment for screening quality, air leakage, etc. Together with a power muffler with appropriate damping, measurements of much higher powers are possible.
Mark:
Different
State:
Used
Producent code:
other
Model:
E4418B
EAN (GTIN):
5904121197807
Due to eBay selling limits
we do not show the full stock quantity in our offers.
Do you want to buy more pieces?
Write to us .
We will prepare an individual offer on eBay with one shipping cost.
Important information!
Please make sure you read the following to avoid any confusion when purchasing and shipping.
Invoice
We issue invoices
(Information for companies registered in the European Union with a VAT eu number, we issue a VAT invoice 0% the price at the auction does not include VAT)
Shipment
We ship from Poland. We ship all over the world.
We offer standard shipping on this listing. If express delivery is required - write to us.
If you want a cheaper shipment - write to us.
If your country is not on the shipping list - write to us and we will quote the shipping for you.
Due to the international transaction, the parcel arrival time depends on the weather conditions, pandemic, customs policy, public holidays etc.
If you have any other questions - write to us.
Returns
We accept returns as per ebay's terms and conditions.
If you are not satisfied with the product - write to us.
WELCOME TO OUR OTHER AUCTIONS