-40%

Arion SPH-1 Stereo Phaser Guitar Effect Pedal

$ 63.35

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • To Fit: Acoustic Electric Guitar
  • Condition: Works great! Missing 2 knobs but it's still east to turn them by hand
  • MPN: SPH1
  • Brand: Arion
  • Analog/Digital: Analog
  • Custom Bundle: No
  • Model: SPH-1 Stereo Phaser
  • Type: Phaser
  • Country/Region of Manufacture: Japan

    Description

    About The Arion Stereo Phaser Pedal
    Arion's Stereo Phaser modulation pedal adds a sense of speed to your sound, and will even create spinning speaker sounds. -
    The Stereo Phaser SPH-1 effects pedal is an effector which, by means of its phase circuits generating the electronic phase shift, shifts the phase of original tone, mixes the signals of phase substantially from that of the original tone, and gives a sense of speed or swelling of tone.
    With RES control in the Stereo Phaser from SPH-1, it will assure you an effect like a rotating loudspeaker. The stereo effect is achieved by changing over the OUT 2 / mode switch.
    Arion's Stereo Phaser Effects Pedal features an easy-open battery compartment for simple 9-volt operation.
    Specifications and Features:
    Power Supply not included
    Power Requirements: DC 9V Battery or 100mA - 200mA AC Adapter
    Consumption Current - DC 9V 17mA •Input Impedance - 100K ohms
    Output Impedance - 10K ohms or more
    Maximum Input Level - 0dB, 0dB = 1 V
    Maximum Output Level - +6dB, 0dB = 1 V
    Noise Level - -50dB, 0dB = 1 V input short
    Phase Shift - 4 step (720 degrees)
    LFO SPeed - 6sec - 100ms •Controls - Rate, Depth, Resonance
    Other Functions - Pedal sw, check indicator, mode sw (OUT 2)
    Jacks - Input jack, output jacks 1 and 2, AC adapter jack
    Dimensions - 73W x 50H x 127D mm
    Weight - 325 grams including battery
    Controls:
    Rate: controls the speed/rate of the LFO wave that controls the effect
    Depth: controls the depth/amplitude of the modulation (the size of the range in which the effect sweeps).
    Resonance: sets the amount of effected signal fed back into the effect (for a stronger effect)
    Out 2: Direct/Stereo switches output 2 between a clean output or an output for stereo use.