Car Battery Tester V311B 12V Automotive Alternator Tester 1002000CCA

Description

Feature:
1. Main Function: Support battery test under starting and charging status, test and display battery voltage, rated value, measured value, internal resistance value, service life, remaining battery parameter information.
2. Other Function: Support fast and standard test mode selection, viewing battery waveform analysis, picture saving and printing function, and USB printing.
3. Multi Modes Choice: Support multiple modes and standard tests, can quickly evaluate the performance of the vehicle battery, and display the results.
4. Practical: It can covers 8 battery standards CCA, JIS, GB, SAE, MCA, CA, DIN, IEC, EN, and BCI. Supports 9 languages including English, Spanish, French, Portuguese, Italian, German, Polish, Russian, Chinese.
5. Wide Application: This battery detector is suitable for a variety of 12V batteries. It is widely used for ordinary acid battery, AGM flat battery, AGM spiral battery, GEL, EFB.
Specification:
Item Type: Car Battery Tester
Model: V311B
Main Control Chip: APM32F103VCT6
Appearance Color: blue
Interface Type: a pair of reverse black and red clips
Shell Material: ABS
Display: 2.8 inch TFT color screen, resolution: 240 x 320
External Power: 12V
Working Voltage: 9-18V
Measurement Standards: CCA, JIS, GB, SAE, MCA, CA, DIN, IEC, EN, BCI
Measurement Type: Ordinary battery, AGM flat plate, AGM winding, GEL, EFB
Measuring Range:
CCA: 100-2000A
BCI: 100-2000A
CA: 100-2000A
MCA: 100-2000A
JIS: 26A17-24SH52
DIN: 100-1400A
IEC: 100-1400A
EN:100-2000A
SAE: 100-2000A
GB: 10-250Ah
Product Parameter Information Description:
1. Voltage:
The current voltage value of the battery measured
2. Rated value:
The nominal value on the battery, such as SAE CCA (cold start current value), GB Ah (capacity value)
You need to input the value on the battery label to the tester and select the corresponding test standard;
3. Measured value:
The current value measured and evaluated by the detector, such as CCA,Ah
It is the difference between the nominal value and the measured value
Generally, the measured value of a new battery will be close to the nominal value. The longer the battery is used, the worse the aging, and the lower the measured value will be
4. Internal resistance:
The internal discharge resistance value of the battery varies with the brand, process, type, current temperature, and duration of use of the battery
The better the performance of the general battery, the lower the internal resistance value
5. Life:
The value calculated based on the evaluation of the rated value and the current state of the battery reflects the degree of aging of the battery and the percentage of life remaining
6. Remaining power:
The value calculated according to the current state of the battery indicates how much power is left in the battery. A full charge is ;
Similar to the number of bars displayed on the phone
7. The starting voltage has a downward trend and is lower than 11V, it also shows that the starting voltage is normal. Which state is abnormal
The car battery will go from low to high in an when it starts. Generally, when the battery is lower than 8.5V, the car battery will not catch fire. 10.5V cars will give an alarm, and some cars will give an alarm at 11V. Most The alarm is about 10V, so 11V is the normal offline value
Interpretation of Measurement Standards:
CCA: The most commonly used value of cold start current, the specifications are specified by SAE&BCI, which is the most commonly used rating for starting batteries at 0°F (-18°C)
BCI: International Battery Council Standard
CA: 0 ℃ effective starting current rating
MCA: Marine battery standard, the effective starting current rating at 0℃
JIS: Japanese Industrial Standard is displayed as a combination of numbers and letters on the battery, for example: 55D23, 80D26
DIN: Standard of the German Automotive Industry Council
IEC: International Electrotechnical Commission standard
EN: European Automobile Industry Association Standard
SAE: American Society of Engineers standard
GB: China National Standard
Package List:
1 x V311B Car Battery Tester
1 x Manual
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3.
T
he duties are buyers' responsibility
.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.
1. Any questions,
pls. contact us via ebay message or email us.
We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "
5
" in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.