Heyco #9148, Conduit Hub Straight Non Metalic, NPT Hub x5 Pieces 500-6112-000

Description

Heyco-Flex III Liquid Tight Fitting   x5 Pieces
3/4" non-metallic conduit hub for Flex-III tubing, NEMA4X
For use with Heyco-Flex III Corrugated Tubing in trade sizes 3/8˝ through 1˝. See page 2-1. • Nontoxic and UV resistant. • Rated for NEMA 4 and 4X applications when used with Heyco-Flex III Tubing. • Rated for NEMA Type 3R applications. • Easy, permanent assembly between the tubing and fittings: push the tubing over the fitting ferrule until the tubing clicks into place. • Lightweight and lower installed cost. • Quick and easy installation. • Suitable for use in high vibration or flexing applications (automotive equipment, fiber optics, computer and peripherals, lab equipment, robotics, etc.). • Resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing. • For use in both wet and dry applications. • If using a tapped hole, Teflon® tape is needed on the threads of the connector, for all other applications an O-ring and Locknut are needed to attain liquid tight. • Use of an O-ring may be required for a complete liquid tight system with a non-threaded mounting hole.