LCD Digital Single Phase Din Rail Electricity Power Consumption Energy Meter kWh

Description

HIGH QUALITY: The meter is fully in conformity with the relevant technical requirements of GB/T national standard and the IEC62053 international standard of grade 1 or level 2 single-phase energy meter, which can directly and accurately measure active en.
LCD DISPLAY: This meter adopted LCD display is 7+1 or6+1meter shows the total power consumption.
GREAT PERFORMANCE: This meter has the features of high reliability, small volume, light weight, beautiful appearance, advanced technology, and 35mmDIN standard guide rail installation, etc.
LONG SERVICE TIME: It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability, anti electricity-stolen and long life.
WIDELY USED: This table is suitable for the measurement of rated frequency 50 Hz or 60 Hz single-phase ac active electricity, used for fixed installation indoors, apply to the environment temperature is -25 ~ 55 , relative humidity is 95%, and in the air does not contain corrosive gases and avoid dust, mold, salt fog, condensation, insects, etc.
Description
Descriptions:
The meter is fully in conformity with the relevant technical requirements of GB/T17215.321-2008 national standard and the IEC62053 international standard of grade 1 or level 2 single-phase energy meter, which can directly and accurately measure active energy of the energy consumption. It features high reliability, small volume, light weight, beautiful appearance, advanced technology, and 35mmDIN standard guide rail installation, etc.
Specifications:
Model: DDS5188
Phase number: single phase
Type: guide type
Display mode: LCD
Rated voltage: 220V
Rated current: 5-32A
Working temperature: -25 ~ 55
Rated frequency: 50-60Hz +/- 10%
Accuracy level: level 1 (equivalent to measurement error < 1%)
Including S0 port 2000Imp/kWh (ti = 80ms)
Relative humidity: 95%
Size: as the picture
Weight:98g
Wiring diagram:
Test:
The meter has photoelectric coupling type electric pulse test output port, located in terminal button box (as shown in figure 2), + 5 VDC of the test equipment  connected to 20" + "terminal, signal S connected to 21"-" terminal.
Package Included:
1 x  Din-rail energy meter