Lithium Battery 18650 Capacity Tester Module Digital Measurement High-Precision

Description

Home
Arduino
Module
Sensor
Chips
About Us
Product Description:
Product name: 18650 lithium battery capacity tester
Product model: XH- M239
Display accuracy: 0.1
Measurement accuracy: 1mAH
Power supply voltage: DC5- 12V/18650 battery standby current: 5mA
Discharge current: about 500mA
Load power: 10W 8Q
Middle
Appearance size: 111*97*25mm
T104mm-60mm
Installation size: 3mm in the figure on the right
Product weight: 93g
Set the discharge stop voltage and press the display 888 to restore the factory setting at the same time.
Short press: start / pause switching
Short press: mAh/mWh toggles display\
Long press: data zero
* *automatic save without operation 5 seconds after the value setting is complete
The minimum discharge stop voltage of 18650 battery is 2.75V. In general, when the voltage is reduced to 0.875 times of the rated voltage (3.24V), it should be charged, and if it continues to be used, the voltage will drop rapidly, and it may be damaged by overdischarge, which will affect the life span. (recommended discharge termination voltage set to 3.5V)
The charging voltage is generally 4.20V-4.3V/4.35V.
Measurement time calculation
Assuming that the battery capacity is 2000mAH, the discharge current of this detector is about 500mAH. the measuring time is about 4 hours.
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.