Walk-In Tub to Shower Easy Step-Through DIY Cut-out Insert Senior Safety

Description

The Step Through Insert is a Do It Yourself tub to shower conversion kit allowing you to turn your existing bathtub into a walk-in shower.
(Let me know upon ordering which size Step Through kit your tub requires using guidelines below.)
This is a
Complete Easy to Do it Yourself Kit
. Any handy man or able person will be able to install using our easy to follow instruction sheet.
Installs in just 2-3 hours.
This kit works on
all Bath Tubs - Fiberglass - Steel - Cast-iron.
Kit includes:
Step Through insert (white) -
Cardboard template - Slip resistant pad - 1 Tube of our highest quality glue/silicone -
Installation instructions
.
Choose from 3 different Step Through insert sizes.
Please follow the guidelines below to determine the correct Step Through insert size for your tub.
Measure the tub rail.
The most important factor in determining which size Step Through insert kit to order is the measurement of the tub rail. This is the wall portion of the tub that you are currently stepping over and will be cutting out. Please note that most tub rail designs will widen and curve as they reach the floor of the tub. Therefore, you will want to make sure you measure the rail from the widest point at which the tub to shower kit will be placed; not simply across the top of the tub rail. Use a tape measure or ruler to measure down 10″ on the INSIDE AND OUTSIDE of the tub rail wall and mark it. Then use a level and tape measure together to determine the rail measurement at the widest point.
A. Place one end of the level on the mark you made.
B. Align the top bubble to make sure you are holding it level.
C. Run the tape measure from the aligned level to the opposite edge of the tub rail and read the measurement. Some tubs have a decorative front wall that protrudes slightly, so take this into account. On this example, however, it reveals an offset of 1/2″ which could indicate a larger size Step Through kit is required than what taking the measurement simply across the top of the rail would have indicated.
Select correct Step Through kit size.
Compare your measurements to those below and select the correct Step Through kit.
SMALL: Maximum Rail Width 4 3/4"
MEDIUM: Maximum Rail Width 5 3/4"
LARGE: Maximum Width 7 3/4"
Let me know upon ordering which size Step Through kit your tub requires through the note section of your PayPal payment or use the
Ask Seller a Question
below.
(
Listing is for the INSERT KIT ONLY. Tub not included.
This is not a tub overlay.)